How pricing works
- $75 service call. Covers the trip and the in-home diagnosis. It is not the price of the repair.
- Price before work. After diagnosis you get the full repair price for approval. Nothing is repaired without your OK.
- Service call credited. If you approve the repair, the $75 is applied toward it. If you decline, the service call is the only charge.
- Warranty. 90-day labor warranty; qualifying parts carry the 1-year manufacturer warranty.
Laundry
Front load washer repairs| Repair | Typical range |
|---|
| Drain pump or pump filter serviceA clogged pump filter is cleared first; many E21 calls end there. | $180–$400 |
| Door lock assembly | $180–$360 |
| Door boot (bellow) seal | $220–$500 |
| Water inlet valve or flow meter housing | $180–$400 |
| Pressure sensor / air trap | $180–$330 |
| Shock absorbers or suspension | $190–$420 |
| Drive belt | $180–$290 |
| Motor control (inverter) board | $280–$660 |
| Drive motor | $320–$770 |
| Main control or user interface board | $280–$680 |
| Tub bearings / rear tubLabor-heavy; we talk through repair versus replacement first. | $450–$990 |
Laundry Tower repairs| Repair | Typical range |
|---|
| Washer drain pump or filter serviceLower half; access is through the front. | $180–$440 |
| Washer door lock or door boot | $190–$510 |
| Dryer heating element or gas burner parts | $200–$500 |
| Dryer belt, rollers or idler pulleyUpper half; usually requires top and front panel removal. | $200–$500 |
| Washer or dryer control boardEach half has its own control. | $300–$750 |
| Washer motor or motor control board | $320–$790 |
Dryer repairs| Repair | Typical range |
|---|
| Thermal limiter or high-limit thermostatAn open limiter usually has a cause — most often restricted venting. | $180–$290 |
| Temperature sensor (NTC) | $180–$290 |
| Moisture sensor (bars or capacitive assembly)500/600 Series use a capacitive sensing assembly. | $180–$370 |
| Heating element (electric) | $180–$420 |
| Gas burner parts (igniter, valve coils, flame sensor) | $180–$440 |
| Heat-circuit wiring or connector repairElectrolux tech tips point to connections for E53 and some no-heat and no-start faults. | $180–$330 |
| Drum belt | $180–$290 |
| Drum rollers or idler pulleySeveral 2024-2026 Electrolux tech tips cover roller and idler noise. | $180–$420 |
| Drive motor or blower | $260–$620 |
| Main control boardConnector seating is checked first (Electrolux tech tip LNTT2519). | $260–$660 |
Refrigerators and freezers
Refrigerator repairs| Repair | Typical range |
|---|
| Evaporator fan motorMoves cold air from the freezer coil to both sections; a 2025 Electrolux tech tip lists it as a cause of no-cooling and even a dead unit. | $180–$420 |
| Condenser fan motorWorks hardest in Las Vegas summers; a weak fan overheats the compressor. | $180–$400 |
| Defrost heater, sensor or thermal cutoutDepends on which part failed and how much of the freezer must be opened. | $180–$460 |
| Compartment or defrost thermistor | $180–$350 |
| Fresh-food air damperControls how much cold air reaches the fresh-food section. | $180–$460 |
| Water inlet valve | $180–$400 |
| Ice maker (freezer or in-door)In-door fresh-food ice makers take more labor than freezer ice makers. | $220–$570 |
| Main power board or user interfaceWiring and harness faults are ruled out first. | $280–$770 |
| Compressor inverter (VCC) boardVariable-capacity models only. | $280–$680 |
| Refrigerant leak repair and rechargeEPA 608EPA 608 work. Price depends on where the leak is and whether it is reachable. | $450–$1,430 |
| Filter-drier replacement, evacuation and recharge (restriction)EPA 608EPA 608 work. | $480–$1,210 |
| Evaporator replacementEPA 608EPA 608 work, including recovery, brazing, drier, evacuation and weighed-in charge. | $650–$1,540 |
| Compressor replacementEPA 608EPA 608 work, including drier, evacuation and weighed-in charge. R600a and variable-capacity systems sit at the upper end. | $750–$1,820 |
Cooking
Range and oven repairs| Repair | Typical range |
|---|
| Oven temperature probe (RTD) | $180–$310 |
| Bake, broil or convection element (dual-fuel / electric) | $180–$400 |
| Oven igniter (gas) | $180–$400 |
| Surface burner igniter or spark module | $180–$360 |
| Convection or cooling fan motor | $190–$460 |
| Door lock motor or door hinges | $180–$440 |
| Gas valve or safety valveGas work — never a DIY repair. | $220–$510 |
| Oven control or power board | $280–$720 |
Wall oven repairs| Repair | Typical range |
|---|
| Oven temperature probe (RTD) | $180–$310 |
| Cooling fanProtects the electronics; fan faults carry different F numbers on different generations. | $200–$480 |
| Hidden bake elementUsually requires pulling the oven out of the cabinet. | $240–$570 |
| Broil or convection element / convection fan | $190–$510 |
| Motorized door lock | $200–$480 |
| Relay (power) board | $280–$680 |
| Touch control / user interfaceDouble and combination ovens can share one control. | $320–$860 |
Cooktop repairs| Repair | Typical range |
|---|
| Burner igniter or spark switch | $180–$350 |
| Spark module | $180–$400 |
| Gas valveGas work — never a DIY repair. | $220–$510 |
| Induction power (generator) board | $320–$860 |
| Touch control board | $280–$720 |
| Glass-ceramic top (induction / electric)Glass availability varies by model. | $280–$830 |
Dishwashers
Dishwasher repairs| Repair | Typical range |
|---|
| Drain pump or sump/filter cleaningMany i20 calls are a blocked filter, sump or drain hose. | $180–$330 |
| Water inlet valve | $180–$310 |
| Door latch or door switch | $180–$310 |
| Leak sensor (Aqua Control) service and leak repairThe tray switch is the messenger; the leak source is what gets repaired. | $180–$400 |
| Heating element or heater relay diagnosisSome heating alarms call for descaling, not a new heater. | $180–$400 |
| Wash (circulation) pump | $280–$620 |
| Control or user interface board | $240–$680 |
Estimated repair ranges represent typical repairs under normal service conditions. Your final cost depends on the exact model, the parts required, supplier pricing and availability, what diagnosis finds, and the labor involved. Additional labor may be needed when the appliance has to be pulled out, uninstalled and reinstalled, or when cabinetry, trim, panels or other components must be removed to reach the failed part. Parts prices change with supplier availability, market conditions, shipping and import costs. You receive the final repair price for approval after diagnosis and before any repair work begins. The $75 service call is applied toward an approved repair. Labor is covered by our 90-day labor warranty, and qualifying parts carry the applicable 1-year manufacturer warranty.
Why Electrolux repairs can cost more than budget brands
Electrolux parts — inverter motor controls, steam and capacitive-sensing dryer components, built-in oven controls — are often priced above mass-market equivalents, and built-in wall ovens and integrated dishwashers take more labor to remove and reinstall. The ranges above reflect that. We'll always tell you if a repair doesn't make economic sense for your appliance's age and condition.
Frequently asked questions
Why not quote a firm price by phone?
Because the same symptom has several possible causes on Electrolux appliances, and a price for the wrong part helps no one. We can share the typical range for your symptom by phone; the exact price follows diagnosis.
Do you charge extra on weekends?
Our hours are Mon–Fri 8 AM–7 PM · Sat–Sun 8 AM–4 PM. Call (725) 353-8500 for current availability and any applicable charges before booking.
Are these prices guaranteed?
No — they are typical ranges, not quotes. Your price depends on the model, parts and labor involved, and is confirmed before work.