Wall oven families we service
| Electrolux family | How to recognize it | Error codes |
|---|---|---|
| Electrolux single, double and microwave-combination wall ovens (ECWS / ECWD / ECWM) | ECWS (single), ECWD (double) and ECWM (microwave combination) wall ovens; four-digit F codes. | View codes |
| Electrolux single and double wall ovens EI30EW38 / EI30EW48 | EI30EW wall ovens with a touch control and two-digit F codes. | View codes |
| Electrolux Wave-Touch wall ovens (EW30EW55) | EW30EW Wave-Touch wall ovens. | View codes |
Why the same fault has three code numbers
- Cooling-fan faults are F47/F48 on this generation but F45/F46 on the earlier EI30EW ovens and F43/F44 on EW30EW55 ovens — the same problem, different numbers.
That is exactly why we ask for the model number when you call with a code. "F45" is a cooling-fan fault on an EI30EW oven; on an ECWD oven the cooling-fan codes are F47 and F48. Reading a code without the model invites the wrong part.
Hidden bake and installation
- These ovens use a hidden bake element under the oven floor; covering the floor with foil, a drip tray or a liner blocks heat and is a known cause of problems, and the installation base must be solid wood or a material rated for the heat.
Common problems
- Electrolux oven not heatingThe oven stays cold, heats slowly or will not reach temperature.→
- Electrolux oven door lockedThe oven door stays locked after self-clean or shows F90/F95/F96/F97.→
Cooling fan codes
Wall ovens rely on a cooling fan to protect the electronics above the oven cavity. For the cooling-fan-speed code, Electrolux's tech tip CKTT2211 lists the checks in order: fan and speed-sensor harness connections, whether the fan spins freely (loose blade, ducting, insulation, debris), and a damaged top cover rubbing the fan shaft — before the fan itself is replaced.
Access and labor
Most wall oven element, door lock and fan repairs require sliding the oven forward out of the cabinet, which takes two people and care for the cabinetry. That is part of why wall oven repair ranges run higher than freestanding ranges.
Typical Electrolux wall oven repair cost
| Repair | Typical range |
|---|---|
| Oven temperature probe (RTD) | $180–$310 |
| Cooling fanProtects the electronics; fan faults carry different F numbers on different generations. | $200–$480 |
| Hidden bake elementUsually requires pulling the oven out of the cabinet. | $240–$570 |
| Broil or convection element / convection fan | $190–$510 |
| Motorized door lock | $200–$480 |
| Relay (power) board | $280–$680 |
| Touch control / user interfaceDouble and combination ovens can share one control. | $320–$860 |
Estimated repair ranges represent typical repairs under normal service conditions. Your final cost depends on the exact model, the parts required, supplier pricing and availability, what diagnosis finds, and the labor involved. Additional labor may be needed when the appliance has to be pulled out, uninstalled and reinstalled, or when cabinetry, trim, panels or other components must be removed to reach the failed part. Parts prices change with supplier availability, market conditions, shipping and import costs. You receive the final repair price for approval after diagnosis and before any repair work begins. The $75 service call is applied toward an approved repair. Labor is covered by our 90-day labor warranty, and qualifying parts carry the applicable 1-year manufacturer warranty.
Example repairs
F47 on a double wall oven
- Appliance
- ECWD double wall oven
- Symptom
- Upper oven shuts down with F47.
- What diagnosis found
- Cooling fan dragging on its shaft; speed sensor harness good.
- Repair
- Replaced the cooling fan assembly.
Example total: $420 (service call included)
Bakes unevenly, bottom element dead
- Appliance
- ECWS single wall oven
- Symptom
- Pale bottoms, long preheats; broil works.
- What diagnosis found
- Hidden bake element open.
- Repair
- Pulled the oven from the cabinet, replaced the hidden bake element, reinstalled and tested.
Example total: $490 (service call included)
Door locked after self-clean, F090
- Appliance
- Electrolux wall oven
- Symptom
- Door stayed locked hours after cleaning.
- What diagnosis found
- Door lock motor stalled.
- Repair
- Replaced the motorized door lock and verified the lock switch.
Example total: $410 (service call included)
Typical Repair Examples are illustrative scenarios based on common repairs for these models — not specific customer jobs. Your price is quoted after diagnosis.
Frequently asked questions
When I book, which appliance should I choose for a wall oven?
Choose "Range" in the booking form and mention "wall oven" in the description — it routes to the same cooking technician.
My oven door is still locked after self-clean.
That is normal until the oven cools. If it stays locked long after it is cool, or shows F90/F090/F95/F096/F097, the motorized door lock needs service. Don't force the door.
My double oven shows a code on only one cavity. Is it one repair?
Often yes — each cavity has its own sensor, elements and cooling-fan monitoring. Some double and combination ovens share one control board, which we account for in the quote.